Electronics Boards Repair

Repair Service For Lj92-01688a Bn96-12388a Lj41-07015a Samsung X-main Sustain

Repair Service For Lj92-01688a Bn96-12388a Lj41-07015a Samsung X-main Sustain

Repair Service For Lj92-01688a Bn96-12388a Lj41-07015a Samsung X-main Sustain    Repair Service For Lj92-01688a Bn96-12388a Lj41-07015a Samsung X-main Sustain

SERVICE DESCRIPTION - PLEASE READ IN FULL! Coppell TV Repair LLC offers a REPAIR SERVICE for Samsung X-Main sustain board LJ92-01688A / BN96-12388A / LJ41-07015A shown on the picture and used in some Samsung and Insignia plasma TV models.. REPAIR SERVICE means that you need to send your (supposedly) malfunctioning board to us so we can test and eventually repair and return it to you, subject to the below terms and conditions.

There may be versions of the board that have B, C, D etc. Suffixes and they fall within the scope of this service as well. You then package and send the board to us.

We then open the box, test the board and act depending on what we find out. Less than the advertised repair cost. If the board is bad then we attempt to repair it. No service charges are paid. All of the above is subject to meeting the conditions for the board submitted.

Please see according section below for details. BOARD FAILURE SYMPTOMS Typical TV failure symptoms when this board has failed are. On different models the power cable can go to the power supply board or the Y-Main board respectively. If disconnecting that cable allows the TV to stay on, albeit without picture or with very dim and shallow picture, then the board is bad. The TV may start and stay on, but there may be nothing on the screen when this board has failed; this is a tricky symptom because it may be caused by a number of other failures, but it is one we've seen when that board was bad too so we have to list it here with the clear understanding that it is not conclusive. If any of the power components on that board is found to have shortage or if some of the SMD components on the back of the board look burned - specifically R4102 or R4502 - then your board is most likely bad. The list does not guarantee 100% identification and is most likely not complete, i.

There are a number of other ways in which a power supply could have failed resulting in a number of different symptoms. Yet it is what we have seen and it is offered here in hope of being of help, without any implied warranties. This is the time it takes for a package that was received to move up the queue and get opened. Sometimes, depending on situation, we may leave opened box and make another try on the next day. Note that it is not guaranteed that the queue will take exactly 2 or 3 days to process.

Sometimes - especially after long holodays - it can be larger and take longer. We do our best, but we have no efficient means of managing the work load on demand. REQUIREMENTS FOR THE BOARD(S) SENT IN FOR SERVICE. The board(s) we receive must be physically intact and must have not been tampered with or serviced before.

The advertised flat rate for repair service is only valid when the above conditions are met. Exceptions are possible and often applied for minor repair attempts, but we reserve the sole right to judge if and when we would consider a repair minor. It is also possible, depending on the condition of the board, to eliminate the second possibility and just flat our reject having to service the board.

Subject to situation and availability we may also recommend replacement of the board, again at the higher than advertised price for repair. 4 RIGHT TO WITHDRAW - we reserve the right to refuse to sell for whatever reason. This item is in the category "Specialty Services\Restoration & Repair\Electronics". The seller is "coppelltvrepair" and is located in this country: US.

This item can be shipped to United States.


Repair Service For Lj92-01688a Bn96-12388a Lj41-07015a Samsung X-main Sustain    Repair Service For Lj92-01688a Bn96-12388a Lj41-07015a Samsung X-main Sustain