NOTE:This is a REPAIR SERVICE ON YOUR ACTUAL BOARD, Board in pictures not for sale. Yes, This is a Repair service and means you'll need to send us your board for repair. This Repair service is for D BOARD SONY HDTV Rear Projection TV (CONVERGENCE), BOARD # A-1054-156-A, or A1054155A, 1-862-711-13-4, and SIMILAR BOARD. MODELS: KP-46WT520, KP-51WS520, KP-57WS520, and Others using similar board. ==CONVERGENCE IS THE MOST PROBLEMS WITH Projection TVS.Discolored on top or bottom with bad color. Lines don't line up anymore in convergence adjust. SOME TIPS ON REMOVING BOARD FROM TV.
>Convergen board is the one in the pictures above. First Take picture, mark every connector with a sharpy or any parmanet marker so you'll put it back correctly. Remove all screws holding board to plastic bottom. Then to release board from bottom press in secure plastic lock and lift board slowly.
To unplug RED Thick wire do this: From unit where all red thick wires meet before picture tubes (car distribuitor looking part), Push cable in and turn clockwire like 1/4 then at same time then pull up cable, if not sucess keep trying, don't use much force or you'll mess up tip of cable. To remove thin cable, just follow cable all the way to from of tv then mark it and unplu it by pulling it out. Now board is ready to go :.
PLEASE WHEN SENDING YOUR BOARD TO US, make sure to wrap it up very well in bubble wrapping and peanuts in a strong box, Thanks. TEXAS TV PARTS AND REPAIR SERVICE. The item "Sony KP-51WS520, KP-57WS520, KP-46WT, D Board CONVERGENCE REPAIR SERVICE, A1054155A" is in sale since Monday, February 29, 2016. This item is in the category "Specialty Services\Restoration & Repair\Electronics". The seller is "generalelectronicparts" and is located in Plano, Texas.
This item can be shipped to United States.